雙組份打膠機是完成中空玻璃二道密封的專用設備，在運用過程中可能會呈現形形色色的問題，濟南雙組份打膠機廠家的售后效勞人員，分離多年調試和客戶實踐消費的經歷，對雙組份打膠機在運用和維護方面總結了以下幾點經歷，整理成以下小文，希望可以協助進入中空玻璃加工行業的朋友。
Two-component glue beater is a special equipment to complete two-way sealing of hollow glass, which may present various problems in the operation process. After-sales service personnel of Jinan two-component glue beater manufacturer separated years of debugging and customer experience of practical consumption. The following experiences were summarized in the application and maintenance of two-component glue beater. The following articles were arranged in the hope of helping. Friends who enter the hollow glass processing industry.
1、膠盤壓不下去
1. The disc can't press down.
①桶變形，不圓了，可用錘子把桶口敲圓，再壓下去。
①桶變形，不圓了，可用錘子把桶口敲圓，再壓下去。
②桶太小了，或是壓盤密封圈過大，能夠在密封圈上涂抹一點白膠，可起到光滑的作用再壓下去。
The barrel is too small, or the pressure plate seal ring is too large, can be coated with a little white glue on the seal ring, can play a smooth role and then press down.
③恰當加大升降壓力，待壓入后恢恢復值。
(3) Increase the rising and falling pressure properly and restore the recovery value after the pressure is put in.
2、氣泡問題（A組份有氣泡或是混合后呈現氣泡）
2. Bubble problem (bubbles in component A or bubbles after mixing)
①壓膠時未能完整排盡空氣，所以每次換膠時，一定要把排空氣的閥門翻開，等空氣排完后再打開。
When pressing the glue, the air can not be exhausted completely, so every time the glue is changed, the valve of the exhaust air must be turned open, and then open after the air is exhausted.
②手動混膠過程中混入空氣。
(2) Air is mixed in the process of manual mixing.

3、混合不平均后膠發灰，泛藍的緣由
3. Reasons for blueness and grey hair after uneven mixing
①參加的B組份量缺乏，加大B組份的量，將比例尺向小的數字方向調→（9，8，7，6）。
(1) Lack of B component, increase the number of B component, and adjust the scale to small digital direction (9, 8, 7, 6).
②B組份在運用時要用棍子悄悄攪拌一下。由于B組份在出廠時，上面都會放一小層硅油，以防桶蓋不嚴實時漏氣進去，B組份固化結殼。
(2) Component B should be stirred quietly with a stick when it is used. As component B is out of the factory, a small layer of silicone oil will be put on it to prevent the lid from leaking in real time, and component B solidifies the crust.
③A組份里用的納米鈣白度高，所以和黑膠混合后發灰，泛藍，但膠的性能不會遭到影響。由于雙組份膠做成一個白的和一個黑的，目的就是為了看到混合過程有沒有混合平均。
(3) The nano-calcium used in component A has high whiteness, so when mixed with black glue, it will be grey and bluish, but the properties of the glue will not be affected. Because the two-component glue is made into a white one and a black one, the purpose is to see whether the mixing process has an average mixing.
以上由濟南雙組份打膠機廠家提供給大家的精彩內容就到這里了！如果大家有相關的業務問題，歡迎咨詢我們官網的客服人員：http://www.hebeiruizhi.com！謝謝支持！
Above by Jinan two-component glue machine manufacturer to provide you with wonderful content here! If you have relevant business problems, please consult our customer service staff on the official website: http://www.hebeiruizhi.com! Thank you for your support!