當前位置：中空玻璃設備日常的一些維護細節！
時間：2023-09-28 來源：http://www.hebeiruizhi.com/ 發布人：昌盛機械
中空玻璃設備日常保養與維護策略，是中空玻璃加工廠要時時刻刻注意的事情，一旦發現中空玻璃設備有異常，應立即進行檢修，保證中空玻璃進行能夠安全運行。保障中空玻璃生產效率，企業在使用中空玻璃設備生產的過程中，經常會出現一系列的問題，由于工作人員不知如何處理，而導致故障更加糟糕，這時就是廠家要為上機前對工作人員進行培訓，可以及時的應變中空玻璃設備在生產過程的出現的問題。另外，有的設備操作也可能存在工作人員變動和離崗，對設備的了解和操作熟練程度也是比較重要的。
The daily maintenance and upkeep strategy of insulating glass equipment is a matter that insulating glass processing plants should always pay attention to. Once any abnormalities are found in the insulating glass equipment, immediate maintenance should be carried out to ensure the safe operation of the insulating glass. To ensure the production efficiency of insulating glass, enterprises often encounter a series of problems during the production process of using insulating glass equipment. Due to the staff not knowing how to handle them, the faults are even worse. At this time, the manufacturer needs to provide training to the staff before starting the machine, so as to timely respond to the problems that occur in the production process of insulating glass equipment. In addition, some equipment operations may also involve staff changes and departures, and understanding and proficiency in the operation of the equipment are also important.
中空玻璃生產過程當中一定要注意細節，包括中空玻璃設備的使用維修及中空玻璃的材料選用都很關鍵。比如中空玻璃生產過程中，中空玻璃內部結霧。產生原因：由于二道密封劑質量不穩定或質量不過關，在陽光的照射下揮發到中空玻璃內部導致結霧；或者是干燥劑質量差，在太陽光照射下，釋放低分子物，導致結霧。
During the production process of insulating glass, it is important to pay attention to details, including the use and maintenance of insulating glass equipment, as well as the selection of insulating glass materials. For example, during the production process of insulating glass, fog forms inside the insulating glass. Reason for occurrence: Due to the unstable or substandard quality of the second sealing agent, it evaporates into the interior of the insulating glass under sunlight, resulting in fogging; Or it may be due to poor quality of the desiccant, which releases low molecular weight substances under sunlight, leading to fogging.
丁基膠涂膠機是中空玻璃設備中的必須要用的設備，主要的功能是給鋁框涂丁基膠的，也是使用比較頻繁的設備。當遇到丁基膠涂布機擠出的丁基膠，出現毛刺不光滑時的解決方法。如果是新設備，應先觀察出膠孔是否光滑，如果出膠孔粗糙，應先打磨，再試機器；舊機器，由于設備的溫度傳感器有時不靈敏，顯示的溫度與實際的不相符，這時就需要將溫度進行上調，直到出膠正常為止。當遇到丁基膠不沾鋁條和玻璃時，是由于溫度的影響造成，建議將溫度進行上調到合適為止。
The butyl adhesive coating machine is a necessary equipment in insulating glass equipment, and its main function is to apply butyl adhesive to aluminum frames, which is also a frequently used equipment. When encountering the butyl adhesive extruded by the butyl adhesive coating machine, there is a solution to the problem of uneven burrs. If it is a new equipment, it is necessary to first observe whether the adhesive hole is smooth. If the adhesive hole is rough, it should be polished first and then the machine should be tried again; In old machines, due to the temperature sensor being sometimes insensitive, the displayed temperature does not match the actual temperature. Therefore, it is necessary to increase the temperature until the glue is released normally. When encountering butyl adhesive not adhering to aluminum strips and glass, it is due to the influence of temperature. It is recommended to raise the temperature to a suitable level.
上一篇：生產中空玻璃需要什么設備？昌盛為您服務！
下一篇：中空玻璃生產線選型要注意什么？
相關新聞 more+
- 中空玻璃打膠機，助您開啟高效生產新時代！ 2026/02/19
- 中空玻璃生產線打膠機傳送V帶不平衡？這樣調，傳送平穩不跑偏 2026/02/13
- 中空玻璃生產線打膠難題：壓力夠卻打不滿膠？這樣排查就解決 2026/02/12
- 全自動封膠線實操科普：山東昌盛板壓段，筑牢封膠質量核心防線 2026/02/10
- 中空玻璃生產線實操科普：小玻璃清洗機反轉打滾？這樣解決最省心 2026/02/06
- 全自動封膠線實操科普：白膠泵密封圈這樣換，杜絕漏膠保順暢 2026/02/04
- 雙組份打膠機實操科普：出膠體這樣保養維護，延長壽命保順暢 2026/02/02
- 中空玻璃生產線：清洗機這樣保養，清潔高效更耐用 2026/01/30
- 全自動封膠線實操科普：板壓壓合效果差？四角落差這樣調精準 2026/01/28
- 雙組份打膠機實操科普：黑膠泵過濾這樣清洗，避免堵塞保順暢 2026/01/27
產品分類Product categories
聯系我們Contact us
