頻調速打膠機性能特點：

Performance characteristics of frequency adjustable speed gluer:

1、整機工作功率非常低，有效降低電能損耗：

1. The working power of the whole machine is very low, which effectively reduces the power loss:

采用德國氣液增壓技術，使整機總功率為1.59KW（夏季1.4KW），每天省電量（與其他廠家比）約為1736Kwh（按8小時工作制），一年省電量633度。相當于節省資金3168元（按0.5元/度）。

Using the advanced German gas-liquid pressurization technology, the total power of the whole machine is 1.59kw (1.4kw in summer), and the daily power saving (compared with other manufacturers) is about 1736kwh (according to the 8-hour working system), and the annual power saving is 633 degrees. It is equivalent to saving 3168 yuan (at 0.5 yuan / degree).

2、整機架體為鋼板折合而成，臺面為不銹鋼拉絲板。

2. The frame body of the whole machine is made of steel plate, and the table top is made of stainless steel wire drawing plate.

3、技術的出膠裝置，膠缸可擺出換膠，無漏膠現象：

3. The technologically advanced glue discharging device allows the glue cylinder to be swung out and replaced without glue leakage:

每天節約膠量約為0.25Kg，一年節省膠量約為90Kg（按360天），相當于節省資金3150元（按35元/公斤）。

The amount of glue saved per day is about 0.25kg, and the amount of glue saved per year is about 90kg (based on 360 days), which is equivalent to saving 3150 yuan (based on 35 yuan / kg).

4、四檔變頻傳送，快捷生產效率工作

4. Four gear frequency conversion transmission, efficient production efficiency

5、可靠的自動化控制：

5. Reliable automatic control:

選用臺灣臺達公司PLC及人機產品，實現整機穩定而的控制方式。自動關機、自動定時加熱、自動PLC溫控、自動皮帶傳送、自動補壓，自動檢測每天打框數量并記錄。有效提高生產效率及降低工人勞動強度。

The PLC and man-machine products of Taiwan Delta company are selected to realize the stable and advanced control mode of the whole machine. Automatic shutdown, automatic timing heating, automatic PLC temperature control, automatic belt transmission, automatic pressure supplement, automatic detection of the number of boxes per day and recording. Effectively improve production efficiency and reduce labor intensity.

觸摸屏打膠機性能特點：觸摸屏人機界面，PLC控制系統；數字化控制出膠，停膠時間；無膠時自動顯示功能；膠缸膠嘴雙加熱系統；膠嘴高度調節功能；膠嘴距離調節功能；設備預加熱功能；弧形鋁框涂布功能；技術參數：

Performance characteristics of touch screen glue applicator: touch screen human-machine interface, PLC control system; Digitally control the dispensing and stopping time; Automatic display function when there is no glue; Double heating system of rubber cylinder and nozzle; Glue nozzle height adjustment function; Glue nozzle distance adjustment function; Equipment pre heating function; Arc aluminum frame coating function; Technical parameters:

涂膠速度：0–22m/min(可調節)；膠嘴距離：0–27mm；氣壓：0.6–0.8Mpa；電源：2kw1P+N220V50Hz；液壓：0-20Mpa；加熱溫度：100℃-160℃

Gluing speed: 0 – 22m/min (adjustable); Glue nozzle distance: 0 – 27mm; Air pressure: 0.6 – 0.8MPa; Power supply: 2kw1p+n220v50hz; Hydraulic pressure: 0-20mpa; Heating temperature: 100 ℃ -160 ℃

丁基膠加熱時間：30–40min；重量：420kg；設備尺寸：3000mm(長)×450mm(寬)×650mm(高)

Heating time of butyl rubber: 30 – 40min; Weight: 420kg; Equipment size: 3000mm (length) × 450mm (width) × 650mm (high)

以上就是為大家介紹的有全自動封膠線的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://linshi.jncsjx.com

The above is a detailed introduction of the automatic sealing line for you. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://linshi.jncsjx.com