單組份打膠機比較簡單，只需一個壓盤把膠水抽出定量打到產品即可。
The single component glue applicator is relatively simple. It only needs a pressure plate to draw out the glue and beat it quantitatively to the product.
雙組份打膠機：原理跟雙液點膠機一樣，根據客戶AB膠桶量身訂制兩個壓盤，把膠桶放入壓盤下，通過壓盤壓膠再通過定量泵配比、混合、定量打到產品上。目前市面的中空玻璃打膠機大多數為活塞式打膠，由于活塞式有一個抽膠的過程，經常會導致打膠的線條忽大忽小，所以我司的中空玻璃打膠機都是以可連續性供膠的精密齒輪泵抽膠，這樣可保證打膠線條均勻，不會有忽大忽小的情況出現。
Two component glue applicator: the principle is the same as that of double liquid dispensing machine. Two pressure plates are customized according to the customer's AB glue barrel. Put the glue barrel under the pressure plate, press the glue through the pressure plate, and then mix, and quantitatively hit the product through the quantitative pump. At present, most of the insulating glass gluing machines on the market are piston gluing. Because the piston type has a gluing process, the gluing lines are often large and small. Therefore, our insulating glass gluing machines are pumped with precision gear pumps that can continuously supply glue, so as to ensure that the gluing lines are uniform and there will be no large and small situations.
中空玻璃打膠機根據自動化程度可分為：半自動打膠機及全自動打膠機。
Insulating glass gluing machine can be divided into semi-automatic gluing machine and full-automatic gluing machine according to the degree of automation.
半自動中空玻璃打膠機：半自動打膠機只是把膠水配比、混合、定量打膠的設備，再配備手持式打膠槍，由于中空玻璃規格都較大，需人手移動打膠槍把膠水打到中空玻璃上。
Semi automatic gluing machine for insulating glass: the semi-automatic gluing machine is only a device for proportioning, mixing and quantitative gluing of glue, and is equipped with a hand-held glue gun. Since the specifications of insulating glass are large, it is necessary to manually move the glue gun to hit the glue on the insulating glass.
全自動中空玻璃打膠機：全自動中空玻璃打膠機配備三軸機械手，三軸機械手跟打膠機統一通訊，相互配合，打膠機把膠水配比、混合后定量供到三軸機械手，三軸機械手可實現半圓、圓形、半圓弧、四方形、三角形等各種不規則形狀打膠作業。行程根據客戶玻璃尺寸定制。
Full automatic insulating glass gluing machine: the full-automatic insulating glass gluing machine is equipped with a three-axis manipulator. The three-axis manipulator communicates with the gluing machine uniformly and cooperates with each other. The gluing machine quantitatively supplies the glue to the three-axis manipulator after proportioning and mixing. The three-axis manipulator can realize various irregular gluing operations such as semicircle, circle, semi-circular arc, square and triangle. The itinerary is customized according to the customer's glass size.

中空玻璃打膠機特點：
Features of insulating glass gluing machine:
1.配比、定量準確不會出現打膠線條忽大忽小的情況
1. The proportioning and quantification are accurate, and the gluing lines will not be large or small
2.通過進口高精度齒輪泵抽膠，穩定性高使用壽命長。
2. The rubber is pumped by imported high-precision gear pump, which has high stability and long service life.
3.加裝限位報警功能，壓盤壓到桶底后，設備發出聲光報警提示工作人員更換膠桶。
3. Install the limit alarm function. After the pressure plate is pressed to the bottom of the barrel, the equipment sends an audible and visual alarm to prompt the staff to replace the rubber barrel.
4.出膠大小可根據實際情況自由調節。
4. The size of glue can be adjusted freely according to the actual situation.
三軸機部分特點：
Some features of three-axis machine:
1.使用工控電腦配合進口伺服電機，運行穩定，。
1. The industrial computer is used to cooperate with the imported servo motor to ensure stable operation,.
2.教導式編程，編程方便快捷。
2. Instructional programming, convenient and fast programming.
3.存儲容量：2500點以上編程點。
3. Storage capacity: more than 2500 programming points.
4.可選配滾珠平臺或流水線作業功能，使生產效率更高效。
4. Ball platform or assembly line operation function can be selected to make production efficiency more efficient.
適用膠水：硅酮膠、高粘度硅膠、玻璃膠等高粘度膠水流體控制作業。
Applicable glue: silicone glue, high viscosity silica gel, glass glue and other high viscosity glue fluid control operations.
今天小編給大家呈現就是關于 雙組份打膠機的相關知識，如果您對于本文有什么疑問及問題歡迎來電咨詢或者網站下邊留言：http://linshi.jncsjx.com
Today, Xiaobian presents you the relevant knowledge about two-component gluing machine. If you have any questions and questions about this article, please call us or leave a message at the bottom of the website: http://linshi.jncsjx.com