一臺雙組分打膠機是由數千的零部件組成的，其中較為重要的零部件為氣缸、各種伺服電機、電磁閥、PLC控制系統、膠嘴和混膠棒等組成。

　　A double component glue machine is composed of thousands of parts, of which the more important parts are cylinder, various servo motors, electromagnetic valves, PLC control system, glue mouth and glue stick.

　　其中膠嘴的材質制定要是那種特質的金屬材質，因為膠嘴直接跟玻璃的邊緣進行長期接觸，盡管接觸的力道不會非常的大，但是長期接觸也會對膠嘴產生傷害，如果質量較差筆者認為1年左右膠嘴就會有效報廢。

　　The material of the glue mouth is made of the quality of the metal material, because the glue mouth is directly contact with the glass edge for a long time, although the contact force will not be very large, but the long-term contact will also harm the glue mouth. If the quality is poor, the author thinks that the glue mouth will be completely scrapped in 1 years or so.

　　打膠機對于廠房溫度、濕度的要求，作為設備來講打膠機本身對于廠房的溫度要求不高，一般應安裝在干燥、無粉塵、無腐蝕性氣體,溫度在0～40度的車間內。同其他設備的要求幾乎沒有什么太大的區別。

　　For the temperature and humidity of the factory building, the glue machine itself is not high in the temperature of the plant as the equipment. It should be installed in the dry, dust free, non corrosive gas, and the temperature is in the 0~40 degree workshop. There is little difference between the requirements of other devices.

　　關于日常保養維護也相當的簡單，如膠管的清洗方面設備會自動判斷停機多久，如果停機達到設定的時間了且自動清洗功能沒有關系的話，設備會自動對膠管進行清理工作，避免我們因為人員失誤或其他問題沒有及時清理導致的各種問題出現。

　　The daily maintenance and maintenance is quite simple, such as the hose cleaning equipment will automatically judge how long the equipment will stop, if the shutdown time is set and the automatic cleaning function is not related, the equipment will automatically clean the hose to avoid us because the personnel misuse or other problems are not timely cleaned up. All kinds of problems arise.

　　本文由雙組份打膠機為您提供，我們的網站是:http://www.hebeiruizhi.com我們將以全心全意的熱情為您提供更優良的服務，歡迎您的訪問!

　　This article is provided by the double component glue machine for you. Our website is: http://www.hebeiruizhi.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.