該設備本體由機身機架、鋁框背板、自動接料裝置、步進給料機構、折彎機構、自動斷料機構、電氣控制系統、動力控制系統、控制箱及觸摸屏人機界面等結構組成。

The device body is composed of a body frame, an aluminum frame backplate, an automatic feeding device, a stepper feeding mechanism, a bending mechanism, an automatic cutting mechanism, an electrical control system, a power control system, a control box, and a touch screen human-machine interface.

自動接料裝置：由接頭定位部件和鋁條定位部件組成，當鋁條尾部到達信號發出時，接料系統會自動定位鋁條尾部，等待下一條鋁條的自動續接。

Automatic feeding device: composed of joint positioning components and aluminum strip positioning components. When the signal is sent at the tail end of the aluminum strip, the feeding system will automatically position the tail end of the aluminum strip and wait for the automatic continuation of the next aluminum strip.

步進給料機構：當控制系統發出步進長度信號時，由該系統執行給料。

Step feeding mechanism: When the control system sends a step length signal, the system executes feeding.

折彎機構：折彎機構的折彎角度可以準確調節和控制。

Bending mechanism: The bending angle of the bending mechanism can be precisely adjusted and controlled.

自動斷料機構：當初始上料或一個框折彎完成時，斷料機構會自動切斷鋁條。

Automatic cutting mechanism: When the initial feeding or bending of a frame is completed, the cutting mechanism will automatically cut the aluminum strip.

電氣控制系統：電氣控制系統是整個設備的核心部分，設備的控制軟件安裝在MC運動控制器中。所有的控制指令、運算工作、輸入輸出信號、系統狀態監視，以及與操作人員的信息交流均由該部分完成。

Electrical control system: The electrical control system is the core part of the entire equipment, and the control software of the equipment is installed in the MC motion controller. All control instructions, calculation work, input and output signals, system status monitoring, and information exchange with operators are completed by this section.

該系統采用松下支持RTEX總線的A6N伺服及電機。RTEX具有出眾的性價比，采用RTEX總線控制系統后，客戶在不增加電機成本的情況下，大幅降低了配線安裝工作。100M的網絡帶寬和RTEX優異的穩定特性，確保了MC1002R與系統各個A6N伺服驅動器之間的控制周期能夠達到0.5ms，從而大幅提高了客戶機器的控制精度。

The system adopts Panasonic's A6N servo and motor that support RTEX bus. RTEX has a very high cost performance ratio. By adopting the RTEX bus control system, customers can significantly reduce wiring and installation work without increasing motor costs. The 100M network bandwidth and excellent stability characteristics of RTEX ensure that the control cycle between MC1002R and various A6N servo drivers in the system can reach 0.5ms, greatly improving the control accuracy of the customer's machine.

動力控制系統：由數個氣動電磁閥、相應氣路、眾多氣動元件，以及控制信號回路組成氣動動力系統，負責完成設備復雜的程控動作。

Power control system: composed of several pneumatic solenoid valves, corresponding pneumatic circuits, numerous pneumatic components, and control signal circuits, the pneumatic power system is responsible for completing complex program control actions of the equipment.

觸摸屏軟件界面：操作人員對設備的使用、所需要的大量的數據輸入，以及操作人員需要了解的設備運行的信息，均通過觸摸屏來完成。

Touch screen software interface: The operator's use of the device, the required large amount of data input, and the information that the operator needs to know about the operation of the device are all completed through the touch screen.