中空玻璃結露會讓產品的品質降低，影響正常的保溫隔音效果，下面全自動封膠機廠家就給大家分析一下促使中空玻璃露點的升高的三種情況，希望對大家有所幫助！
Hollow glass condensation will reduce the quality of products, affecting the normal insulation and sound insulation effect, the following full-automatic sealant manufacturers will give you an analysis of the three conditions to promote the dew point of hollow glass, hoping to help you!
1.密封膠擠壓得太松或是里面有機械異物
1. Sealant is extruded too loosely or there are mechanical foreign bodies in it.
用兩道彈性密封膠把中空玻璃與鋁管間隔體結合在一起，一層使用丁基橡膠封存，第二層使用結構硅酮膠密封。在現實操作過程中密封膠里如果存在機械異物或是在涂膠時擠壓得太松，導致膠體里面形成毛細管，并由于中間層里面和外面有壓差或濕度差，大氣里的水分進入中空玻璃中間層，導致中空玻璃中間層里的含水量升高。
Two elastic sealants are used to combine hollow glass with aluminium tube spacer. One layer is sealed with butyl rubber and the second layer is sealed with structured silicone rubber. In the actual operation process, if there are mechanical foreign bodies in the sealant or when the sealant is extruded too loosely, the capillary is formed in the gel, and there is pressure difference or humidity difference between the inside and outside of the middle layer, the moisture in the atmosphere enters the middle layer of the hollow glass, which leads to the increase of water content in the middle layer of the hollow glass.
2.水汽透過密封膠進到中間空氣層里
2. Water vapor enters the middle air layer through sealant
一般使用均勻高分子聚合物作為密封膠，但聚合物也并非完全不透氣，它兩側的逸度差(壓差或濃度差促進了聚合物進行等溫?cái)U(kuò)散。中空玻璃的密封膠的主要擴散物是大氣里的水分，聚合物的氣體滲透系數(氣密性)是導致水蒸氣擴散的重要原因;膠層厚度與空氣內外的水汽分壓差導致的水份擴散是造成中空玻璃失去功效的重要因素。
Homogeneous polymer is usually used as sealant, but the polymer is not completely airtight. The fugacity difference (pressure difference or concentration difference) between the two sides of the polymer promotes the isothermal diffusion of the polymer. The main diffuser of sealant for hollow glass is water in atmosphere. The gas permeability coefficient (air tightness) of polymer is an important reason for water vapor diffusion. The water diffusion caused by the thickness of adhesive layer and the difference of water vapor pressure inside and outside the air is an important factor for the loss of effectiveness of hollow glass.

3.干燥劑的有效吸收水分的能力低
3. The ability of desiccant to absorb water effectively is low.
干燥劑不僅要將中空玻璃密封零件在安裝的時侯密封在中間層里的水分吸收，使中空玻璃形成合格的初始露點，還要不停的吸收透過膠層分散到大氣層里的水分，持續維持合格的露點。
The desiccant not only absorbs the moisture of the insulating glass sealing parts in the middle layer during installation, so that the qualified initial dew point of the insulating glass can be formed, but also continuously absorbs the moisture dispersed into the atmosphere through the rubber layer, and maintains the qualified dew point.
如干燥劑吸收水分的功能差，無法有效地吸收擴散到大氣層里的水份，就會使得水份聚集在大氣里，水分壓提升，中空玻璃的露點升高。
If the desiccant has a poor function of absorbing water and can not effectively absorb the water diffused into the atmosphere, it will make the water accumulate in the atmosphere, raise the water pressure, and raise the dew point of the hollow glass.
好了，今天的精彩內容就給大家介紹到這里，不知道大家對雙組份打膠機還有什么疑問嗎？歡迎詢問我們官網：http://linshi.jncsjx.com的在線客服人員！
Well, today's wonderful content will be introduced to you here, do not know you have any doubts about the manufacturer of automatic sealant machine? Welcome to our official website: online customer service staff at http://linshi.jncsjx.com!